LabAlert Monitoring System Accessories by Panasonic Corporation
 
Click to enlarge. To view full image, click here
 

LabAlert Monitoring System Accessories by Panasonic Corporation

Manufacturer: Panasonic Corporation
  • Accessories for LabAlert Monitoring System
  • Gateway transmitter with 5V/2A power supply and 14' ethernet cable ; One required with each system, need customer to supply ethernet connection; Use with all equipment
  • Gateway transmitter with 5V/2A power supply and 14' ethernet cable with Trigger Magnet (2 input) with alarm contact (Requires NTCPBUNIV or NTCLN2 temperature probes); One required with each system., need customer to supply ethernet connection, Built-in two sensor input and dry contact output, multii-level password support; Use with all equipment
  • CO2 Sensor Probe (Requires NTC PS24V) Stand alone CO2 Sensor probe; Requires NTCPS24V and NTCANLG40xxPS transmitter; Use with C02 Incubators and other C02 controlled devised
  • Earth magnet needed to trigger sensors to transmit; use with NTCGATEWAY, for all equipment
  • LabAlert Power Supply, 24VDC
  • Magnetic door switch, surface mount, plastic with wire leads ; 5/8" gap distance, 1 1/2" x 1/4" x 3/8" (Requires either NTC22xxPS or NTCUNIVZBPS); Use with Ultra-Low Freezers,-86°C; Lab Freezers,-30°C; Refrigerators; Refrigerator Freezer Combinations; Incubators, Heated and Refrigerated; Incubators, Temperature / Remote Contacts; Incubators,CO2/O2/RH/ Temperature
  • Pressure sensor kit for LabAlert (Requires NTCANLG40xxPS transmitter); Includes pressure transducer and 24V power supply; Use with Clean Room Pressure monitoring
  • Transmitter with 4 analogue 1-5V DC inputs for monitoring analogue signals; Approximately 200 ft. range; (2) Lithium batteries - lasts up to 10 years, Automatically joins network; Will store data for 1 week in case of power failure or internet outage on gateway/probe; Display +/- 1ºC Accuracy (+/- 0.5ºC when calibrated); Coated electronic circuit board ; Use with Incubators,CO2/O2/RH/ Temperature or other 0-5v or 4-20mA output signals
  • Temperature probe for LN2 tank; Requires universal transmitter; Use with Cryogenic/ Vapor Phase, -160°C
  • Transmitter for -40˚ to +60˚C; Quad input can use 1 to 4 sensors; Use with Lab Freezers,-30°C; Refrigerators; Refrigerator Freezer Combinations; Incubators, Heated and Refrigerated
  • Temperature Probe -40˚C TO +60˚C use with Lab Freezers,-30°C; Refrigerators; Refrigerator Freezer Combinations; Incubators, Heated and Refrigerated;Incubators, Temperature/ Remote Contacts; Incubators,CO2/O2/RH/ Temperature
  • Transmitter for -90 ˚to -40˚C ; Quad input can use 1 to 4 sensors; Use with Ultra-Low Freezers,-86°C
  • Temperature probe for -90˚C to -40˚C for use with Ultra-Low Freezers,-86°C
  • Transmitter with 1 x -40˚C to +60˚C temp input and one switch closure input / use with Incubators, Temperature/ Remote Contacts; Incubators,CO2/O2/RH/ Temperature
  • Transmitter for -160˚ to +60˚ (2 input) with alarm contact ; For use with temperature ranges from -160˚ to +60˚
  • Temperature probe for -160˚C to +60˚C (Requires universal transmitter NTCUNIVZBPS); use with Cryogenic/ Vapor Phase, -160°C
  • Wireless room sensor with integrated temp/RH transmitter, Operating temperature of -40°C to 85°C ; use with Ambient/Room Humidity Temperature
  • Vaccine simulation glass 10 ml bottle with NTC-PBHT temperature probe (Sensor + bottle solution) ; use with Refrigerators: Refrigerator Freezer Combinations
  • Temperature Humidity Kit (Requires NTCANLG40xxPS transmitter); For use in chambers to measure temperature and humidity

For your business

To view pricing and availability

 
 
 

Ordering Information

Material Description Packaging
PNANTCCO2V SENSOR, CO2, PROBE, LABALERT 1 EA
Stock Allocated QTY / Remaining QTY / Allocation Reset Date
PNANTCPS24V POWER SUPPLY, 24VDC, LABALERT 1 EA
Stock Allocated QTY / Remaining QTY / Allocation Reset Date
PNANTCTRHKIT KIT, TEMP, RH, LABALERT 1 KT
Stock Allocated QTY / Remaining QTY / Allocation Reset Date
PNATCGATEWAYT GATEWAY TRANSMITTER, ETH CABLE, TRIGGER 1 EA
Stock Allocated QTY / Remaining QTY / Allocation Reset Date
 

Specifications

HPIS Code
  • 220_40_140_0
Latex Free
  • Yes
UNSPSC
  • 41111970
  • 41112105

Documents/SDS

Literature

SDS

Category Id: - Content Id: